[:Source<Hw>]:Bb:arbitrary:mcarrier:clock; [:Source<Hw>]:Bb:arbitrary:mcarrier:create - R&S SGT100A User Manual

®
R&S SGT100A
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CLOCk?
The command queries the resulting sample rate at which the multi carrier waveform is
output by the arbitrary waveform generator. The output clock rate depends on the num-
ber of carriers, carrier spacing and input sample rate of the leftmost or rightmost carri-
ers.
Return values:
<Clock>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CREate
Creates a multi carrier waveform using the current settings of the carrier table. The
multi carrier waveform is saved into the file defined with command
SOUR:BB:ARB:MCAR:OFIL. The file extension is *.wv.
Example:
Usage:
Manual operation:
User Manual 1176.8674.02 ─ 07
MMEM:CDIR '/var/user/waveform'
sets the default directory.
BB:ARB:MCAR:OFIL 'mcar1_2'
defines the file name mcar1_2.wv for the multi carrier wave-
form.
BB:ARB:MCAR:CLO
creates multi carrier waveform mcar1_2.wv.
The new multi carrier waveform is loaded.
Event
See "Create and Load"
float
Range: 400 to Max
Increment: 1E-3
BB:ARB:MCAR:CLOC?
queries the ARB multi carrier output clock rate.
Query only
See "Clock Rate" on page 100
MMEM:CDIR '/var/user/waveform'
sets the default directory.
BB:ARB:MCAR:OFIL 'multi_wv1'
defines the file name multi_wv1.wv for the multi carrier wave-
form.
BB:ARB:MCAR:CRE
creates multi carrier waveform multi_wv1.wv.
Event
See "Create" on page 100
Remote Control Commands
SOURce Subsystem
on page 101
376