R&S SGT100A User Manual page 356

®
R&S SGT100A
<HeapAvailableKb>
Usage:
:MMEMory:LOAD:STATe <SavRclStateNumb>, <file_name>
Loads the specified file stored under the specified name in an internal memory.
After the file has been loaded, the instrument setting must be activated using an *RCL
command.
Setting parameters:
<SavRclStateNumb> Determines to the specific <number> to be used with the *RCL
<file_name>
Usage:
:MMEMory:MDIRectory <Directory>
Creates a subdirectory for mass memory storage in the specified directory. If no direc-
tory is specified, a subdirectory is created in the default directory. This command can
also be used to create a directory tree.
Setting parameters:
<Directory>
Usage:
:MMEMory:MOVE <SourceFile>, <DestinationFile>
Moves an existing file to a new location or, if no path is specified, renames an existing
file.
Setting parameters:
<SourceFile>
<DestinationFile>
Usage:
:MMEMory:MSIS <Msis>
Defines the drive or network resource (in the case of networks) for instruments with
windows operating system, using msis (MSIS = Mass Storage Identification String).
User Manual 1176.8674.02 ─ 07
integer
Available heap memory.
Query only
command, e.g. *RCL 4.
String parameter to specify the file name with extension
*.savrcltxt.
Setting only
string
String parameter to specify the new directory.
Event
string
String parameter to specify the name of the file to be moved.
string
String parameters to specify the name of the new file.
Event
SCPI confirmed
Remote Control Commands
MMEMory Subsystem
325