Fill With Sensor - R&S SGT100A User Manual

®
R&S SGT100A
End value
Displays the end value for the frequency or the level entries.
Remote command:
n.a.
Increment value
Sets the increment for the frequency or the level entries.
Remote command:
n.a.
Fill
Fills the selected column in the set range with values, starting with the start value and
using the set increment.
Remote command:
n.a.
7.7.6.7

Fill with Sensor

► To access this dialog, select "SGMA-GUI > Instrument Name > Level > UCOR >
Edit User Cor. Data> Fill With Sensor".
This dialog describes all parameters for filling a table automatically with sensor
readings.
User Manual 1176.8674.02 ─ 07
Signal Generator Settings
RF Settings
218