[:Source<Hw>]:Bb:arbitrary:mcarrier:carrier:count; [:Source<Hw>]:Bb:arbitrary:mcarrier:carrier:mode; [:Source<Hw>]:Bb:arbitrary:mcarrier:carrier:spacing - R&S SGT100A User Manual

®
R&S SGT100A
[:SOURce<hw>]:BB:ARBitrary:MCARrier:SETTing:STORe:FAST
[:SOURce<hw>]:BB:ARBitrary:MCARrier:TIME
[:SOURce<hw>]:BB:ARBitrary:MCARrier:TIME:MODE
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier:COUNt <Count>
Sets the number of carriers in the ARB multi carrier waveform.
Parameters:
<Count>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier:MODE <Mode>
The command sets the carrier frequency mode.
Parameters:
<Mode>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier:SPACing <Spacing>
The command sets the frequency spacing between adjacent carriers of the multi car-
rier waveform. The carriers are generated symmetrically around the RF carrier. The
maximum carrier spacing is limited to Carrier spacing = Total baseband bandwidth /
(Number of carriers - 1).
The total baseband bandwidth is 60, 120 or 160 MHz depending on the installed
options. .
Note:In order to avoid wrap-around problems, the effective "Carrier Spacing" might be
slightly modified. The "Carrier Spacing" is rounded in that way that the carrier closest
User Manual 1176.8674.02 ─ 07
................................................................. 383
integer
Range: 1 to 512
*RST: 1
BB:ARB:MCAR:CARR:COUN 10
sets 10 carriers for the multi carrier waveform.
See "Number of Carriers"
EQUidistant | ARBitrary
EQUidistant
Sets an equidistant carrrier spacing. The carrier frequency in the
carrier table is not configurable.
ARBitrary
Enables you to specify the carrier frequency in the carrier table.
Carrier spacing is irrelevant.
*RST: EQUidistant
BB:ARB:MCAR:CARR:MODE EQU
sets an equidistant carrier spacing. The carrier frequency can
not be set.
See "Mode" on page 96
Remote Control Commands
SOURce Subsystem
....................................... 382
...................................................... 383
on page 97
370