R&S SGT100A User Manual page 455

®
R&S SGT100A
Parameters:
<Q>
Manual operation:
[:SOURce]:IQ:IMPairment:QUADrature[:ANGLe] <Angle>
Sets the quadrature offset for the digital I/Q signal.
Parameters:
<Angle>
Manual operation:
[:SOURce]:IQ:IMPairment[:STATe] <State>
Activates/ deactivates the three impairment or correction values LEAKage, QUADra-
ture and IQRatio for the baseband signal prior to input into the I/Q modulator.
Parameters:
<State>
[:SOURce]:IQ:IMPairment:SWAP[:STATe] <State>
When set to ON, this command swaps the I and Q channel for an external modulation
signal.
Parameters:
<State>
Manual operation:
[:SOURce]:IQ:STATe <State>
Switches the I/Q modulation on and off.
Parameters:
<State>
Manual operation:
User Manual 1176.8674.02 ─ 07
float
Range: -10 to 10
Increment: 0.01
*RST: 0
See "I/Q Offset" on page 139
float
Range: -10 to 10
Increment: 0.01
*RST: 0
See "Quadrature Offset"
0 | 1 | OFF | ON
*RST: 0
0 | 1 | OFF | ON
*RST: 0
See "I/Q Swap" on page 136
0 | 1 | OFF | ON
*RST: 0
See "I/Q Mod State" on page 60
Remote Control Commands
SOURce Subsystem
on page 139
424