Normalized Data Settings - R&S SGT100A User Manual

®
R&S SGT100A
Select "Apply" to confirm the settings.
Remote command:
See
on page 456
Apply, OK
Triggers the instrument to adopt the selected function.
Use "OK" to apply the setting and exits the dialog.
Remote command:
n.a.
7.6.3.5

Normalized Data Settings

The normalized data table is an internal editor where you define the correction values,
Vin/Vmax, ΔV/V and ΔPhase, in form of a table.
To access the internal editor
1. Select "I/Q Mod > Digital Predistortion > AM/AM AM/PM".
2. Select "Digital Predistortion AM/AM AM/PM > Predistortion Settings".
3. Select "Shaping > Normalized Data".
4. Select "Normalized Data".
5. Enter the Pin
User Manual 1176.8674.02 ─ 07
[:SOURce<hw>]:IQ:DPD:SHAPing:POLYnomial:COEFficients
.
max
Signal Generator Settings
Applying Digital Predistortion
196