R&S SGT100A User Manual page 416

®
R&S SGT100A
Example:
Usage:
:MMEMory:DATA:UNPRotected <Msus>, <Data>
The setting command sends the I/Q data and the marker data to the file defined with
the <Msus> parameter. The required tags are created automatically so that the file
content follows the waveform file format.
The query reads out the I/Q data part or the marker information of the specified file.
Waveform files can also be created with the command
ARBitrary:WAVeform:DATA. In this case, the complete content of the waveform file
must be specified, i.e. not only the I/Q or marker data but all required tags.
Parameters:
<Msus>
User Manual 1176.8674.02 ─ 07
MMEM:CDIR '/var/user/waveform'
sets the default directory.
BB:ARB:WAV:CAT?
reads out all the files in the default directory.
Response: sin1, wave
the directory contains the waveform files sin1.wv and
wave.wv.
BB:ARB:WAV:CAT:LEN?
Response: 2
Query only
<Identifier>:<file name>
Mass Storage Unit Specifier
A string that specifies whether I/Q data (NVWFM) or marker data
(NVMKR) is transferred and the file name the data is stored in.
If the file with the specified name does not exist, a file is created.
Any existing content in the file is overwritten.
Complete file path and file extension may also be specified. If
omitted, files are stored in the default directory and the exten-
sion *.wv is assigned to the file name.
Remote Control Commands
SOURce Subsystem
[:SOURce<hw>]:BB:
385