Source:bb:arb Subsystem - R&S SGT100A User Manual

®
R&S SGT100A
[:SOURce<hw>]:BB:PGAin <PGain>
The command sets the relative path gain for the selected baseband signal compared
to the baseband signals of the other baseband sources (external baseband). The gain
affects the signal on the "baseband block" output.
Parameters:
<PGain>
[:SOURce]:BB:INFO:PSEQuencer?
Returns the baseband pulse sequencer information.
Return values:
<InfoXmlString>
Usage:

11.14.4 SOURce:BB:ARB Subsystem

The ARB subsystem contains the commands for setting the ARB Generator. Settings
for clock and trigger interfaces and for external outputs are entered in the
SOURce:INPut and SOURce:OUTput subsystems.
For option R&S SGT-K540, envelope tracking, the ARB for envelope tracking can be
enabled when
suffix to SOURce distinguishes between signal generation for "Baseband 1" and the
second ARB generated for the envelope tracking, "Baseband 2":
●
SOURce[1] = Baseband 1
The keyword SOURce is optional and can be omitted
●
SOURce2 = Baseband 2
The keyword SOURce is mandatory, i.e. the command must contain the keyword
with suffix 2.
The ARB waveform for the envelope tracking (SOURce2) uses the same trigger,
marker and clock settings as the first ARB waveform (SOURce1). Therefore those com-
mands are not defined for SOURce2.
● Common
● Clock
● Trigger
● Marker
● Test Signals
● SOURce:BB:ARB:MCAR
● SOURce:BB:ARB:WAV
● SOURce:BB:ARB:WSEG
User Manual 1176.8674.02 ─ 07
float
Range:
Increment: 1E-3
*RST:
string
Query only
:SCONfiguration:MODE
Settings..................................................................................................352
Settings....................................................................................................... 352
Settings.....................................................................................................355
Settings..................................................................................................... 362
Settings............................................................................................ 365
Subsystem................................................................... 369
Subsystem......................................................................383
Subsystem................................................................... 390
Remote Control Commands
-50 to 50
0
is set to AFETracking. Then the numeric
SOURce Subsystem
351