R&S SGT100A User Manual page 69

®
R&S SGT100A
The main panel of the application opens. The panel provides a quick access to the
main settings of the configured and activated instruments. The display shows one
row per instrument with the instrument-specific settings. The rows comprise the
instrument, the connection state, the used frequency and power level, the state of
the RF output and the modulator and the used reference frequency source.
3. In the R&S SGMA-GUI main panel, the green indicator in front of the instrument's
name confirms that there is a connection between the instrument and the remote
PC and that the instrument is recognized by the software.
4. In the R&S SGMA-GUI main panel, select the row corresponding to the instrument
to be configured and select "Instrument Name > Preset" to restore the predefined
instrument's settings.
5. In the R&S SGMA-GUI main panel, select the row corresponding to the instrument
to be configured and adjust the "Frequency" as required.
6. Select "SGMA-GUI > RF On" to enable the output of the CW signal.
User Manual 1176.8674.02 ─ 07
First Steps with the Instrument
How to Generate a CW Signal
38