Syntax For Common Commands; Syntax For Device-Specific Commands - R&S SGT100A User Manual

®
R&S SGT100A
15.1.3.1

Syntax for Common Commands

Common (=device-independent) commands consist of a header preceded by an aster-
isk (*) and possibly one or more parameters.
Examples:
*RST
*ESE
*ESR?
*IDN?
15.1.3.2

Syntax for Device-Specific Commands

Not all commands used in the following examples are necessarily implemented in the
instrument.
For demonstration purposes only, assume the existence of the following commands for
this section:
●
DISPlay[:WINDow<1...4>]:MAXimize <Boolean>
●
FORMat:READings:DATA <type>[,<length>]
●
HCOPy:DEVice:COLor <Boolean>
●
HCOPy:DEVice:CMAP:COLor:RGB <red>,<green>,<blue>
●
HCOPy[:IMMediate]
●
HCOPy:ITEM:ALL
●
HCOPy:ITEM:LABel <string>
●
HCOPy:PAGE:DIMensions:QUADrant[<N>]
●
HCOPy:PAGE:ORIentation LANDscape | PORTrait
●
HCOPy:PAGE:SCALe <numeric value>
●
MMEMory:COPY <file_source>,<file_destination>
●
SENSE:BANDwidth|BWIDth[:RESolution] <numeric_value>
●
SENSe:FREQuency:STOP <numeric value>
●
SENSe:LIST:FREQuency <numeric_value>{,<numeric_value>}
Long and short form
The mnemonics feature a long form and a short form. The short form is marked by
upper case letters, the long form corresponds to the complete word. Either the short
form or the long form can be entered; other abbreviations are not permitted.
User Manual 1176.8674.02 ─ 07
RESET
EVENT STATUS ENABLE
EVENT STATUS QUERY
IDENTIFICATION QUERY
Remote Control Basics
Resets the instrument.
Sets the bits of the event status enable
registers.
Queries the contents of the event status
register.
Queries the instrument identification
string.
Annex
527