Default State Of The Network Settings; Lxi Browser Settings - R&S SGT100A User Manual

®
R&S SGT100A
On the R&S SGT the LXI functionality is already installed and enabled. Thus, the
instrument can be accessed via any web browser (like the Microsoft Internet Explorer)
to perform the following tasks:
●
Modifying network configurations
●
Remote control of the instrument
●
Performing SCPI remote diagnostics

10.5.1 Default State of the Network Settings

According to the LXI standard, an LCI must set the following parameters to a default
state.
Parameter
TCP/IP mode
Dynamic DNS
ICMP ping
Password for LAN configuration
The LAN reset also resets the following parameters for the R&S SGT:
Parameter
Hostname
Description
Negotiation
VXI-11 discovery
The LAN settings are configured using the instrument's

10.5.2 LXI Browser Settings

To access the instrument via the web browser:
► Type in the instrument's host name or IP address in the address field of the
browser on your PC, for example "http://10.111.0.97".
Note: Do not add the missing zeros in the IP address, while opening the instru-
ment home page.
User Manual 1176.8674.02 ─ 07
Network and Remote Control Operation
Value
DHCP + Auto IP Address
Enabled
Enabled
LxiWebIfc
Value
<Instrument-specific host name>
Signal generator
Auto detect
Enabled
LXI Browser
LXI Configuration
Settings.
294