[:Source<Hw>]:Bb:arbitrary:mcarrier:setting:load; [:Source<Hw>]:Bb:arbitrary:mcarrier:setting:store - R&S SGT100A User Manual

®
R&S SGT100A
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:SETTing:LOAD <Filename>
Loads the settings file. If a settings file with the specified name does not yet exist, it is
created. The file extension may be omitted. Only files with the file extension
*.arb_multcarr will be loaded or created.
Setting parameters:
<Filename>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:SETTing:STORe <Filename>
The command stores the current settings of submenu "Multi Carrier" in a file in the
specified directory. The file extension may be omitted, the files are stored with the file
extension *.arb_multcarr.
Setting parameters:
<Filename>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:SETTing:STORe:FAST <Fast>
Determines whether the instrument performs an absolute or a differential storing of the
settings.
Enable this function to accelerate the saving process by saving only the settings with
values different to the default ones.
Note: This function is not affected by the "Preset" function.
Parameters:
<Fast>
Manual operation:
User Manual 1176.8674.02 ─ 07
See "Save/Recall Frame"
string
BB:ARB:MCAR:SETT:LOAD '/var/user/new'
creates settings file new.arb_multcarr.
Setting only
See "Save/Recall Frame"
string
BB:ARB:MCAR:SETT:STOR '/var/user/mcarr2'
stores settings file mcarr2.arb_multcarr in the default direc-
tory.
Setting only
See "Save/Recall Frame"
0 | 1 | OFF | ON
*RST: 1
See "Save/Recall Frame"
Remote Control Commands
SOURce Subsystem
on page 96
on page 96
on page 96
on page 96
382