Instruments:scan; Instruments:scan:hnprefix; Instruments:serial; Instruments:type - R&S SGT100A User Manual

®
R&S SGT100A
:INSTruments:SCAN <State>
Triggers a scan function and searches for instruments connected to the remote com-
puter via all of the available interfaces.
Parameters:
<State>
Example:
Manual operation:
:INSTruments:SCAN:HNPRefix <Prefix>
Sets the prefix the searched host names begin with.
Parameters:
<Prefix>
Example:
Manual operation:
:INSTruments:SERial <Serial>
Enters the serial number as instrument's identification while using the USB interface for
remote control.
Parameters:
<Serial>
Example:
Manual operation:
:INSTruments:TYPE <Type>
Selects the instrument's family.
Parameters:
<Type>
Example:
Manual operation:
User Manual 1176.8674.02 ─ 07
Understanding the R&S SGMA-GUI Software
number
1 = triggers the scan function, 0 = aborts the running scan proc-
ess
The query command returns 1 as long as scan is running; 0 indi-
cates completed scan process.
See Chapter 6.6.1, "Configuring Instruments in the R&S SGMA-
GUI", on page 68.
See "Scan" on page 50
string
See Chapter 6.6.1, "Configuring Instruments in the R&S SGMA-
GUI", on page 68.
See "Scan LAN instruments with host name prefix"
<SerialNumberInstr#1>, <SerialNumberInstr#2>,...
See Chapter 6.6.1, "Configuring Instruments in the R&S SGMA-
GUI", on page 68.
See "Serial Number" on page 54
List of CHAR-Data
<TypeInstr#1>,<TypeInstr#2>,...
See Chapter 6.6.1, "Configuring Instruments in the R&S SGMA-
GUI", on page 68.
See "Available Instruments"
Remote Control of the R&S SGMA-GUI
on page 50
on page 51
73