R&S SGT100A User Manual page 442

®
R&S SGT100A
Parameters:
<State>
Example:
Manual operation:
[:SOURce]:BB:IMPairment:IQOutput<ch>:STATe <State>
Activates the impairment or correction values LEAKage, QUADrature and IQRatio for
the corresponding stream.
Parameters:
<State>
Manual operation:
[:SOURce]:BB:IMPairment:IQOutput<ch>:DELay <Delay>
Defines the time delay of both I and Q vectors between the marker signal at the marker
outputs relative to the signal generation start.
A positive value means that the I and Q vectors delay relative to the marker/trigger or
to the other instrument and vice versa.
Parameters:
<Delay>
Manual operation:
[:SOURce]:BB:IMPairment:IQOutput<ch>:QUADrature[:ANGLe] <Angle>
Sets the quadrature offset. A positive quadrature offset results in a phase angle greater
than 90 degrees.
Parameters:
<Angle>
Manual operation:
User Manual 1176.8674.02 ─ 07
0 | 1 | OFF | ON
BB:IMP:OPT:STAT ON
activates internal compensation of signal distortions.
See "Optimize internal IQ-Impairments for RF Output"
on page 141
0 | 1 | OFF | ON
*RST: 0
See "State" on page 140
float
Range: -500E-9 to 500E-9
Increment: 1E-12
*RST: 0
See "IQ Delay" on page 141
float
Range: -10 to 10
Increment: 0.01
*RST: 0
See "Quadrature Offset"
Remote Control Commands
SOURce Subsystem
on page 141
411