[:Source<Hw>]:Bbin:odelay; [:Source<Hw>]:Bbin; [:Source<Hw>]:Bbin:power:peak - R&S SGT100A User Manual

®
R&S SGT100A
Usage:
Manual operation:
[:SOURce<hw>]:BBIN:ODELay <Delay>
Seds the output delay of the external baseband signal.
Parameters:
<Delay>
[:SOURce<hw>]:BBIN:PGAin <PGain>
This command enters the relative gain for the external baseband signal compared with
the signals of the other baseband sources. The actual gain of the different baseband
signals depends not only on the path gain setting but also on the signal characteristics
such as the crest factor and on the number of used sources. used and on the total RF
output power. The gain affects the signal on the "Baseband" In block output.
Parameters:
<PGain>
Example:
[:SOURce<hw>]:BBIN:POWer:PEAK <Peak>
This command enters the peak level of the external baseband signal relative to full
scale of 0.5 V (in terms of dB full scale).
Parameters:
<Peak>
Example:
Manual operation:
User Manual 1176.8674.02 ─ 07
Query only
See "Overflow" on page 241
float
Range: 0 to 1
Increment: 1E-9
*RST: 0
float
Range: -50 to 50
Increment: 1E-3
*RST: 0
Default unit: dB
BBIN:PGA 3dB
sets the relative gain of 3 dB for the external baseband signal.
float
Range: -60 to 3.02
Increment: 0.01
*RST: 0
Default unit: dBfs
BBIN:POW:PEAK -2
enters the peak level of -2 dBfs.
See "Peak Level" on page 241
Remote Control Commands
SOURce Subsystem
405