[:Source<Hw>]:Bb:arbitrary:mcarrier:edit:carrier:start; [:Source<Hw>]:Bb:arbitrary:mcarrier:edit:carrier:stop; [:Source<Hw>]:Bb:arbitrary:mcarrier:edit:carrier:state; [:Source<Hw>]:Bb:arbitrary:mcarrier:ofile - R&S SGT100A User Manual

®
R&S SGT100A
Parameters:
<Start>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:STARt <Start>
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:STOP <Stop>
The command selects the last carrier in the carrier range to which the settings with
the :BB:ARB:MCAR:EDIT:CARR:.. commands shall apply.
Parameters:
<Stop>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:STATe <State>
The command switches all the carriers in the selected carrier range on or off.
Parameters:
<State>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:OFILe <OFile>
This command defines the output file name for the multi carrier waveform. This file
name is used when a waveform is calculated (command SOUR:BB:ARB:MCAR:CLOad
or SOUR:BB:ARB:MCAR:CREate). The file extension is *.wv.
Parameters:
<OFile>
User Manual 1176.8674.02 ─ 07
float
Range: -80 to 0
Increment: 0.01
*RST: 0
Default unit: dB
BB:ARB:MCAR:EDIT:CARR:POW -50 dB
sets the power of the carriers in the carrier range to -50 dB.
See " Gain Start " on page 102
integer
Range: 0 to 511
*RST: 0
BB:ARB:MCAR:EDIT:CARR:STOP 4
the carrier range stops at carrier 4.
See " Carrier Stop " on page 102
0 | 1 | OFF | ON
*RST: 1
BB:ARB:MCAR:EDIT:CARR:STAT ON
sets all the carriers in the carrier range to ON.
See " Carrier State " on page 102
string
Remote Control Commands
SOURce Subsystem
380