Factory Preset - R&S SGT100A User Manual

®
R&S SGT100A
To prevent accidental changes, this parameter is protected. It can be accessed with
protection level 1, see
Remote command:
:SYSTem:TIME
Time Zone
Selects a time zone from a list.
Remote command:
:SYSTem:TIME:ZONE
:SYSTem:TIME:ZONE:CATalog?

8.13 Factory Preset

The "Factory Preset" dialog provides a function to reset the instrument's settings to
their factory states
1. To access this dialog, select "SGMA-GUI > Instrument Name > Setup > Factory
Preset".
2. Select "Execute Factory Preset".
The instrument's settings are reset to their factory states. Security settings and
user data are not effected.
Execute Factory Preset
Reset the instrument's settings to their factory state.
Note: Because "Factory Preset" resets the "Remote Channel Settings" and "Network
Settings" to the default values, executing factory preset via remote control may termi-
nate the connection to the instrument, if these settings had been configured to values
different to the default ones!
The factory preset function resets nearly all instrument settings. In addition to the regu-
lar preset, a "Factory Preset" resets also the following values:
●
Power on settings ("Level" dialog)
●
Network settings including hostname ("Setup > Network Setting" dialog)
●
Remote Channel settings ("Setup > Remote Channel" dialog)
To maintain security, password settings and all settings protected by these passwords
like disabled USB and LAN connections are not changed.
Not affected by the "Factory Preset" are also user data, lists or instrument settings
files, created for example with the "File Save As" function and currently saved on the
instrument's hard disc.
User Manual 1176.8674.02 ─ 07
General Instrument Settings and Instrument Setup
Chapter 8.6, "Protection",
on page 486
on page 487
on page 487
on page 251.
Factory Preset
262