Sample Rate - R&S SGT100A User Manual

®
R&S SGT100A
Note: The connected instrument is indicated only, if the connection is properly estab-
lished and signal transmission is active.
Remote command:
[:SOURce<hw>]:BBIN:CDEVice?

Sample Rate

► To access this dialog, select "SGMA-GUI > Instrument Name > BB Input > Digital
BB In > Sample Rate".
In this section, you can set the sample rate of the external digital baseband signal.
Sample Rate Source
Selects the source for estimating the sample rate or defining it by the user.
"User Defined"
"Digital I/Q In"
Remote command:
[:SOURce<hw>]:BBIN:SRATe:SOURce
Sample Rate Value
Sets the sample rate of the external digital baseband input signal.
Remote command:
[:SOURce<hw>]:BBIN:SRATe[:ACTual]
User Manual 1176.8674.02 ─ 07
on page 401
Enables the user to define the sample rate in the entry field value.
Estimates the sample rate on the digital I/Q input and displays the
value in the value field.
Note: Estimation works best if the sample rate is close to the user
defined value.
Signal Generator Settings
External Baseband Signal - Baseband Input
on page 406
on page 406
239