R&S SGT100A User Manual page 512

®
R&S SGT100A
:SYSTem:COMMunicate:NETWork:STATus?
Queries the network configuration state.
Return values:
<State>
Usage:
:SYSTem:COMMunicate:NETWork:RESTart
Restarts the network connection to the instrument, terminates the connection and sets
it up again.
Example:
Usage:
:SYSTem:COMMunicate:NETWork[:COMMon]:HOSTname <Hostname>
Sets the individual host name of the R&S SGT.
Note: it is recommended that you do not change the host name in order to avoid prob-
lems with the networdk connection. However, if you change the host name be sure to
use an unique name.
The host name is a protected parameter, To change it, first disable protection level 1
with command
Parameters:
<Hostname>
Example:
Manual operation:
:SYSTem:COMMunicate:NETWork[:IPADdress]:DNS <DNS>
Determines or queries the network DNS server to resolve the name.
Parameters:
<DNS>
Example:
:SYSTem:COMMunicate:NETWork[:IPADdress]:GATeway <Gateway>
Sets the IP address of the default gateway.
User Manual 1176.8674.02 ─ 07
0 | 1 | OFF | ON
Query only
SYSTem:COMMunicate:NETWork:RESTart
Event
:SYSTem:PROTect<ch>[:STATe]
string
SYSTem:PROTect1:STATe OFF,123456
SYSTem:COMMunicate:NETWork:HOSTname 'SIGGEN'
sets the individual computer name of the R&S SGT.
See "Hostname"
string
SYST:COMM:NETW:IPAD:DNS?
Response: "10.0.1.11"
Remote Control Commands
on page 485.
on page 257
SYSTem Subsystem
481