Connectors - R&S SGT100A User Manual

®
R&S SGT100A

7.8 Connectors

The USER connectors of the R&S SGT can be used for multiple purposes. In the "Con-
nector" dialog, the correct mode for each connector can be set, and additional settings
for some modes.
► To access this dialog select "SGMA-GUI > Instrument Name > Connectors"
Mode
Selects the mode for the correspondent connector. Some settings are only available
for connector USER 2.
"Marker 1/2"
"Trigger/ Trigger Out"
"Clock In/Out"
"Sync In/Out"
"Next Trigger"
"Signal Valid"
"Not Signal Valid"
"Pulse Video Out"
User Manual 1176.8674.02 ─ 07
Output for a defined marker signal.
Input/output for an external trigger signal.
Input/Output for a clock signal.
Input/Output for SYNC signals used for SYNC-Mode in baseband.
Input next segment for triggering of multi-segment waveform files.
Output of high signal to mark valid frequency and level settings.
Output of high signal to mark the transition state when frequency and
level change.
Available only for USER 2.
Output of the internally generated pulse video (modulating) signal.
The video signal level corresponds to the RF envelope.
Signal Generator Settings
Connectors
234