R&S SGT100A User Manual page 288

®
R&S SGT100A
The dialog provides access to the network settings, like settings about the general net-
work environment and specific identification of the computer in the network. The dialog
also displays an indication whether the instrument is connected to the network or not.
Restart Network
Shuts down the network connection of the instrument and then re-establishes the con-
nection.
This function can be used to resolve network problems.
Note: Only the connection of the instrument to the network restarts, the network itself
is not affected.
Hostname
Displays the individual computer name of the instrument.
A predefined name is indicated and can be used for network connections, see
ter 6.5.3, "Finding Out the Default Hostname of the
It is recommended that a connection of the instrument to the network is coordinated
with the network administrator. Connection errors may affect the entire network.
Remote command:
:SYSTem:COMMunicate:NETWork[:COMMon]:HOSTname
MAC Address
Indicates the MAC address of the network adapter.
Address Mode
Selects if the IP address is assigned automatically or manually.
It is recommended that a connection of the instrument to the network is coordinated
with the network administrator. Connection errors may affect the entire network.
Note: Lost LAN connection to an instrument.
User Manual 1176.8674.02 ─ 07
General Instrument Settings and Instrument Setup
Instrument",
Network Settings
Chap-
on page 65.
on page 481
257