R&S SGT100A User Manual page 477

®
R&S SGT100A
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:CLIPping:TO
Enables clipping and defines its limits.
Parameters:
<ClippingTo>
Example:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:DETRoughing:
Sets the detroughing function.
Parameters:
<DetrFunction>
Example:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:DETRoughing:
Enables/disables deriving the detroughing factor (d) from the selected V
Parameters:
<CouplingState>
Example:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:DETRoughing:
Sets the detroughing factor.
Parameters:
<DetrFactor>
User Manual 1176.8674.02 ─ 07
<ClippingTo>
integer
Range:
*RST:
See Example "Generating an RF envelope signal and defining
the shaping function"
FUNCtion <DetrFunction>
F1 | F2 | F3
*RST:
See Example "Generating an RF envelope signal and defining
the shaping function"
See "Detroughing Function"
COUPling <CouplingState>
0 | 1 | OFF | ON
*RST:
See Example "Generating an RF envelope signal and defining
the shaping function"
See "Couple Detroughing Factor with Vcc"
FACTor <DetrFactor>
float
Range:
Increment: 1E-3
*RST:
Remote Control Commands
0 to 100
100
on page 432
F1
on page 432
on page 172
0
on page 432
0 to 2
0.2
SOURce Subsystem
value.
cc
on page 172
446