[:Source<Hw>]:Bb:arbitrary:wsegment:configure:blank:append - R&S SGT100A User Manual

®
R&S SGT100A
This multi segment waveform is saved with the file name specified in the configuration
file. The file extension is *.wv.
Setting parameters:
<FilenameInput>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:BLANk:APPend
Adds a blank segment to the multi segment file.
Setting parameters:
<SampCount>
<Frequency>
Example:
User Manual 1176.8674.02 ─ 07
string
MMEM:CDIR '/var/user/'
sets the default directory.
BB:ARB:WSEG:CONF:SEL 'multi_sin'
creates the configuration file multi_sin.inf_mswv in the
default directory.
BB:ARB:WSEG:CONF:SEGM:APP 'sinus1'
includes waveform sinus1.wv as segment 1 in the configura-
tion file. The waveform must be available in the default directory.
BB:ARB:WSEG:CONF:SEGM:APP 'sinus2'
includes waveform sinus2.wv as segment 2 in the configura-
tion file. The waveform must be available in the default directory.
BB:ARB:WSEG:CONF:OFIL 'mseg1_2'
defines the file name mseg1_2.wv for the multi segment wave-
form.
BB:ARB:WSEG:CLO '/var/user/multi_sin.inf_mswv'
creates multi segment waveform mseg1_2.wv using the set-
tings of the configuration file multi_sin.inf_mswv.
The new multi segment waveform is loaded.
Setting only
See " Create "
<SampCount>, <Frequency>
float
Specifies the number of samples.
Range:
Increment: 1
*RST:
float
Determines the clock rate.
Range:
Increment: 0.001
*RST:
SOUR:BB:ARB:WSEG:CONF:SEL "MSegFile"
selects a multi segment file.
SOUR:BB:ARB:WSEG:CONF:BLAN:APP 1000,100000000
adds a blank segment with 1000 samples and 100 MHz clock
rate to the selected multi segment file
Remote Control Commands
on page 86
512 to 1E7
1000
400 Hz to Max (depends on instrument type)
1E8
SOURce Subsystem
391