Signal Generator Settings; Baseband; System Configuration - R&S SGT100A User Manual

®
R&S SGT100A

7 Signal Generator Settings

This section summarizes the settings necessary to configure the instrument for signal
generation. The description in this section follows the menu tree structure of the graph-
ical user interface.

7.1 Baseband

7.1.1 System Configuration

► To access the "System Configuration" dialog, select "SGMA-GUI > Instrument
Name > Baseband >System Configuration".
In the "System Configuration" dialog, you can select the signal settings. Depending on
the selected settings the signal flow block diagram may look different, see
User Manual 1176.8674.02 ─ 07
Signal Generator Settings
Baseband
Table 7-1.
75