System Subsystem - R&S SGT100A User Manual

®
R&S SGT100A
:STATus:QUEStionable:NTRansition <Ntransition>
Sets the bits of the NTRansition part of the STATus:QUEStionable register. If a bit is
set, a transition from 1 to 0 in the condition part causes an entry to be made in the
EVENt part of the register.
Parameters:
<Ntransition>
Example:
:STATus:QUEStionable:PTRansition <PTransition>
Sets the bits of the NTRansition part of the STATus:QUEStionable register. If a bit is
set, a transition from 1 to 0 in the condition part causes an entry to be made in the
EVENt part of the register.
Parameters:
<PTransition>
Example:
:STATus:QUEue[:NEXT]?
Queries the oldest entry in the error queue and then deletes it. Positive error numbers
denote device-specific errors, and negative error numbers denote error messages
defined by SCPI. If the error queue is empty, 0 ("No error") is returned.
The command is identical to
Return values:
<Next>
Example:
Usage:

11.16 SYSTem Subsystem

The SYSTem subsystem contains a series of commands for general functions which do
not directly affect signal generation.
User Manual 1176.8674.02 ─ 07
string
STAT:OPER:NTR 0
a transition from 1 to 0 in the condition part of the Status:Ques-
tionable register does not cause an entry to be made in the
EVENt part
string
:STAT:OPER:PTR 32767
all transitions from 0 to 1 in the condition part of the Sta-
tus:Questionable register cause an entry to be made in the
EVENt part
:SYSTem:ERRor[:NEXT]?
string
:STATus:QUEue?
queries the oldest entry in the error queue.
Response: 0, 'no error'
no errors have occurred since the error queue was last read out
Query only
Remote Control Commands
SYSTem Subsystem
on page 478.
475