Add/Edit Instruments - R&S SGT100A User Manual

®
R&S SGT100A
Tip: If you start a scan for an instrument with a set IP address and it doesn't appear in
the list of available instruments it may be due to the prefixes written in this field. You
can perform another scan while leaving this field empty.
Remote command:
:INSTruments:SCAN:HNPRefix
6.1.2.2

Add/Edit Instruments

The dialog provides access to the main instrument's settings, such as "Symbolic
Name", "Instrument Type" and connection settings.
Refer to
for information on how to configure and manage instruments in R&S SGMA-GUI.
Instrument Nr.
Automatically assigned number that indicates the instrument's index in the list of "Avail-
able Instruments".
Symbolic Name
Selects the alias name of the instrument.
Remote command:
:INSTruments:NAME
Instrument Type
Selects the instrument's family.
User Manual 1176.8674.02 ─ 07
Chapter 6.5.2, "Handling Instruments in the R&S
on page 71
Understanding the R&S SGMA-GUI Software
Operating Menu and Toolbar
on page 73
SGMA-GUI", on page 63
52