[:Source<Hw>]:Bb:arbitrary:wsegment:configure:catalog; [:Source<Hw>]:Bb:arbitrary:wsegment:configure:clock; [:Source<Hw>]:Bb:arbitrary:wsegment:configure:clock:mode - R&S SGT100A User Manual

®
R&S SGT100A
Usage:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:CATalog?
Queries the available configuration files in the specified default directory. The configu-
ration files are used to create multi segment waveform files.
Return values:
<Catalog>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:CLOCk <Clock>
This command defines the clock rate used for multi segment waveform output in case
of Clock Mode "User" (:BB:ARB:WSEG:CONF:CLOCk:MODE USER).
Parameters:
<Clock>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:CLOCk:MODE <Mode>
Selects the clock rate mode for the multi segment waveform.
User Manual 1176.8674.02 ─ 07
Setting only
See " Clock Rate " on page 88
string
MMEM:CDIR '/var/user/waveform'
sets the default directory.
BB:ARB:WSEG:CONF:CAT?
reads out all the configuration files in the default directory.
Response: mulit1, multi2
the directory contains the configuration files multi1.inf_mswv
and multi2.inf_mswv.
Query only
See " Load List " on page 85
float
Increment: 1E-3
*RST: max SampleRate
BB:ARB:WSEG:CONF:CLOC:MODE USER
selects Clock Mode User.
BB:ARB:WSEG:CONF:CLOC 50MHz
defines a clock rate of 50 MHz.
See " User Clock Rate "
Remote Control Commands
SOURce Subsystem
on page 90
392