[:Source<Hw>]:Bb:arbitrary:mcarrier:edit:carrier:delay:step; [:Source<Hw>]:Bb:arbitrary:mcarrier:edit:carrier:delay[:Start]; [:Source<Hw>]:Bb:arbitrary:mcarrier:edit:carrier:execute - R&S SGT100A User Manual

®
R&S SGT100A
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:DELay:STEP <Step>
The command sets the step width by which the start delays of the carriers in the
defined carrier range will be incremented.
Parameters:
<Step>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:DELay[:STARt] <Start>
The command sets the start delay for the individual carriers in the defined carrier
range. If the command :BB:ARB:MCAR:EDIT:CARR:DEL:STEP is used to define a
step width, the delay entered here applies only to the starting carrier. The delays of the
remaining carriers are stepped up or down by the delay value specified in
the :BB:ARB:MCAR:EDIT:CARR:DEL:STEP command.
Parameters:
<Start>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:EXECute
The command adopts the settings for the carrier range which has been defined using
the :BB:ARB:MCAR:EDIT:CARR:... commands.
User Manual 1176.8674.02 ─ 07
float
Range: -1 to 1
Increment: 1E-9
*RST: 0
Default unit: s
BB:ARB:MCAR:EDIT:CARR:DEL 5 us
sets a start delay of 5 us for the carriers in the carrier range.
BB:ARB:MCAR:EDIT:CARR:DEL:STEP 1 us
the start delay is incremented by 1us for each carrier, i.e. the
first carrier has a start delay of 5us, the second a start delay of 6
us, etc.
See " Delay Step " on page 103
float
Range: 0 to 1
Increment: 1E-9
*RST: 0
Default unit: s
BB:ARB:MCAR:EDIT:CARR:DEL 5us
sets a start delay of 5 us for the carriers in the carrier range.
See " Delay Start " on page 103
Remote Control Commands
SOURce Subsystem
377