Calibration Subsystem - R&S SGT100A User Manual

®
R&S SGT100A
●
Activating the original state of delivery (factory
on page 311). Only functions that are protected by a password remain unchanged
and the passwords themselves.
:SOURce<hw>:PRESet
:SYSTem:PRESet
Triggers an instrument reset. It has the same effect as:
●
The *RST command
Example:
Usage:
:SYSTem:FPReset
Triggers an instrument reset to the original state of delivery.
Example:
Usage:
Manual operation:

11.4 CALibration Subsystem

:CALibration<hw>:BBIN[:MEASure]?
:CALibration:ALL[:MEASure]?
:CALibration:FREQuency[:MEASure]?
:CALibration:IQModulator:FULL?
:CALibration:IQModulator:LOCal?
:CALibration:LEVel[:MEASure]?
:CALibration:FREQuency:TEMPerature?
:CALibration:LEVel:TEMPerature?
:CALibration:IQModulator:TEMPerature?
:CALibration<hw>:ROSCillator[:DATA]
:CALibration<hw>:BBIN[:MEASure]?
Starts adjustment of the analog I/Q input. The I/Q input is adjusted with respect to DC
offset and gain.
Return values:
<Measure>
User Manual 1176.8674.02 ─ 07
SYST:PRES
All instrument settings (also the settings that are not currently
active) are reset to their default values.
Setting only
SYST:FPR
all instrument settings (also those that are not currently active)
are reset to the factory values.
Event
See "Execute Factory Preset"
................................................................................311
......................................................................................... 312
..............................................................................312
..................................................................................... 312
....................................................................................312
.......................................................................................313
.......................................................................... 313
................................................................................... 313
..........................................................................313
............................................................................. 313
0 | 1 | OFF | ON
*RST: 0
Remote Control Commands
CALibration Subsystem
reset,:SYSTem:FPReset
on page 262
311