[:Source<Hw>]:Bb:arbitrary:wsegment:create; [:Source<Hw>]:Bb:arbitrary:wsegment:lmode; [:Source<Hw>]:Bb:arbitrary:wsegment:name - R&S SGT100A User Manual

®
R&S SGT100A
Parameters:
<Filename>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CREate <FilenameInput>
Creates a multi segment waveform using the current settings of the specified configu-
ration file. The multi segment waveform is saved into the file defined in the configura-
tion file. The file extension is *.wv.
Setting parameters:
<FilenameInput>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:LMODe <LevelMode>
Sets how the segments are leveled.
Parameters:
<LevelMode>
Example:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NAME?
This command queries the name of the waveform of the currently output segment of
the multi segment waveform.
User Manual 1176.8674.02 ─ 07
string
MMEM:CDIR '/var/user/waveform'
sets the default directory.
BB:ARB:WSEG:CONF:SEL 'new'
create configuration file new.inf_mswv in the default directory.
See " New List " on page 85
string
MMEM:CDIR '/var/user/'
sets the default directory
BB:ARB:WSEG:CONF:SEL 'new'
creates the configuration file new.inf_mswv in the default
directory.
BB:ARB:WSEG:CONF:SEGM:APP 'arb1.wv'
'includes waveform arb1.wv as segment 1 in the configuration
file. The waveform must be available in the default directory.
BB:ARB:WSEG:CONF:OFIL 'multi_wv1'
defines the file name multi_wv1.wv for the multi segment
waveform.
BB:ARB:WSEG:CRE '/var/user/new.inf_mswv'
creates multi segment waveform multi_wv1.wv using the set-
tings of the configuration file new.inf_mswv.
Setting only
See " Save List " on page 86
HIGHest | UNCHanged
*RST: HIGHest
:SOURce1:BB:ARBitrary:WSEGment:LMODe HIGHest
Remote Control Commands
SOURce Subsystem
397