R&S SGT100A User Manual page 372

®
R&S SGT100A
Example:
Manual operation:
[:SOURce]:FREQuency:OFFSet <Offset>
Sets a frequency offset, for example include the frequency shift of downstream instru-
ment.
Note: Enabled frequency offset affects the result of the query
Quency:CW?
The query returns the frequency, including frequency offset.
Parameters:
<Offset>
Example:
Manual operation:
[:SOURce]:OPMode <OpMode>
Sets the operation mode.
Parameters:
<OpMode>
Manual operation:
[:SOURce]:LOSCillator:SOURce <Source>
Selects the source of the local oscillator signal.
Parameters:
<Source>
Manual operation:
User Manual 1176.8674.02 ─ 07
See
[:SOURce]:FREQuency:OFFSet
See "Freq/Freq (Offs)"
float
Range: -3e9 to 3e9
Increment: 1E-3
*RST: 0
SOURce:FREQuency:OFFSet 0
SOURce:FREQuency:CW 2143000000
SOURce:FREQuency:OFFSet 20000000
SOURce:FREQuency:CW?
// 2163000000
See "Offset" on page 199
NORMal | BBBYpass
NORMal
normal operation
BBBYpass
Baseband bypass mode
*RST: NORMal
See "Operation Mode"
INTernal | EXTernal
INT: use built in oscillator; EXT: use signal at LO/ REF IN con-
nector
See "Source" on page 201
Remote Control Commands
SOURce Subsystem
on page 341.
on page 60
:SOURce:FRE-
on page 198
341