[:Source]:Correction:cset:catalog; [:Source<Hw>]:Correction:cset:data:frequency - R&S SGT100A User Manual

®
R&S SGT100A
In the following command examples, the files are stored in the default directory.
[:SOURce]:CORRection:CSET:CATalog?
[:SOURce<hw>]:CORRection:CSET:DATA:FREQuency
[:SOURce<hw>]:CORRection:CSET:DATA:FREQuency:POINts?
[:SOURce<hw>]:CORRection:CSET:DATA:POWer
[:SOURce<hw>]:CORRection:CSET:DATA:POWer:POINts?
[:SOURce<hw>]:CORRection:CSET:DATA[:SENSor<ch>][:POWer]:SONCe
[:SOURce]:CORRection:CSET:DELete
[:SOURce<hw>]:CORRection:DEXChange:AFILe:CATalog?
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal
[:SOURce<hw>]:CORRection:DEXChange:EXECute
[:SOURce<hw>]:CORRection:DEXChange:MODE
[:SOURce<hw>]:CORRection:DEXChange:SELect
[:SOURce<hw>]:CORRection:CSET[:SELect]
[:SOURce<hw>]:CORRection[:STATe]
[:SOURce<hw>]:CORRection:VALue?
[:SOURce<hw>]:CORRection:ZERoing:STATe

[:SOURce]:CORRection:CSET:CATalog?

Requests a list of user correction tables. The individual lists are separated by commas.
The lists are stored with the fixed file extensions *.uco in a directory of the user's
choice. The directory applicable to the commands is defined with the command
MMEMory:CDIR.
Return values:
<Catalog>
Example:
Usage:
[:SOURce<hw>]:CORRection:CSET:DATA:FREQuency <Frequency>
Transfers the frequency data to the table selected with :CORRection:CSET:SELect.
The numerical suffix at SOURce must not be used for this command.
User Manual 1176.8674.02 ─ 07
.........................................................................415
............................................................................ 417
................................................................... 421
............................................................................. 422
............................................................................. 422
................................................................. 422
string
MMEM:CDIR '/var/user/ucor'
selects the directory for the user correction files.
CORR:CSET:CAT?
queries which correction tables are available.
Response:UCOR1,UCOR2,UCOR3
the correction tables UCOR1, UCOR2 and UCOR3 are availa-
ble.
Query only
Remote Control Commands
SOURce Subsystem
.................................................... 415
....................................... 416
........................................................... 416
.............................................. 416
.............................................. 418
.............................................418
.................................................. 418
................................419
................................419
.........................................................420
............................................................ 420
............................................................421
........................417
415