R&S SGT100A User Manual page 398

®
R&S SGT100A
Parameters:
<Amplitude>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:FREQuency <Frequency>
Sets the frequency of the test signal.
Parameters:
<Frequency>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:OFFSet <Offset>
Sets the DC component.
Parameters:
<Offset>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:SAMPles <Samples>
Sets the number of sample values required for the rectangular signal per period.
Parameters:
<Samples>
User Manual 1176.8674.02 ─ 07
float
Range: 0 to 1
Increment: 0.001
*RST: 0.800
Default unit: FS
BB:ARB:TSIG:RECT:AMPL 0.5
sets the amplitude of the test signal
See "Amplitude" on page 108
float
Range: 100 to depends on hardware
Increment: 0.01
*RST: 1000
SOURce:BB:ARBitrary:TSIGnal:RECTangle:FREQuency
100 kHz
sets the frequency of the test signal of 100 kHz.
See "Frequency" on page 107
float
Range: -1 to 1
Increment: 0.001
*RST: 0
Default unit: FS
BB:ARB:TSIG:RECT:OFFS 0.5
sets the DC component
See "Offset DC" on page 108
integer
Range: 4 to 1000
*RST: 100
Remote Control Commands
SOURce Subsystem
367