R&S SGT100A User Manual page 489

®
R&S SGT100A
Example:
Manual operation:
[:SOURce<hw>]:IQ:DPD:SHAPing:NORMalized:DATA:CATalog?
Queries the available files with normalized data in the default directory. Only files with
the file extension *.dpd_norm are listed.
Example:
Usage:
Manual operation:
[:SOURce<hw>]:IQ:DPD:SHAPing:NORMalized:DATA:LOAD <Filename>
Loads the selected file.
Setting parameters:
<Filename>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:IQ:DPD:SHAPing:NORMalized:DATA:STORe <Filename>
Saves the normalized data in a file.
Setting parameters:
<Filename>
Example:
Usage:
Manual operation:
User Manual 1176.8674.02 ─ 07
SOURce1:IQ:DPD:SHAPing:NORMalized:DATA #240<values>
// the binary <values> are not printable
SOURce1:IQ:DPD:SHAPing:NORMalized:DATA:CATalog?
// norm
SOURce1:IQ:DPD:SHAPing:NORMalized:DATA:STORe "My_DPD_Normalized"
SOURce1:IQ:DPD:SHAPing:NORMalized:DATA:CATalog?
// norm,My_DPD_Normalized
SOURce1:IQ:DPD:SHAPing:NORMalized:DATA:LOAD "norm"
SOURce1:IQ:DPD:SHAPing:NORMalized:DATA?
// #3112
// the binary data <NormData> is 112 bytes long, i.e. 3 points are define
// binary data is machine readable but not printable
See "Pin " on page 197
max
see
[:SOURce<hw>]:IQ:DPD:SHAPing:NORMalized:DATA
on page 457
Query only
See "Save/Recall Normalized Data"
string
See
[:SOURce<hw>]:IQ:DPD:SHAPing:NORMalized:DATA
on page 457
Setting only
See "Save/Recall Normalized Data"
string
See
[:SOURce<hw>]:IQ:DPD:SHAPing:NORMalized:DATA
on page 457
Setting only
See "Save/Recall Normalized Data"
Remote Control Commands
SOURce Subsystem
on page 197
on page 197
on page 197
458