R&S SGT100A User Manual page 296

®
R&S SGT100A
4. Select "SGMA-GUI main panel > virtual instrument name > Setup > Diagnostic /
Test > Simulation".
The dialog displays a list of software options.
5. Enable the option to be simulated.
The block diagram and the provided signal generator settings are updated accord-
ingly. You can open dialogs, interact with functions or observe the influence of set-
tings as if the virtual instrument is equipped with the selected options.
This is merely a display. The signal generation function is disabled. The dialog and
all unlicensed settings disappear, if a connection to a physical instrument is detec-
ted.
User Manual 1176.8674.02 ─ 07
General Instrument Settings and Instrument Setup
Diagnostic and Tests
265