R&S SGT100A User Manual page 535

®
R&S SGT100A
{CLOCK: frequency}
(mandatory for waveforms)
The tag specifies the clock frequency at which the waveform has to be output, in Hz
(on multi-segment waveforms this tag contains the maximal clock of all segments).
A query of ARB:CLOCk? after loading the waveform returns the value set using the
CLOCK tag. This value can later be altered with the command ARB:CLOCk?.
Example:
Usage:
{COMMENT: string}
The tag contains a plain text ASCII string of arbitrary length. The string is not analyzed
in the R&S SGT. It is used to describe the file. The string is allowed to contain all print-
able ASCII characters except the closing curly bracket.
Example:
Usage:
{COPYRIGHT: string}
The tag contains an ASCII string of arbitrary length. The string is not analyzed in the
R&S SGT. It is used to store copyright information about the file content.
Example:
Usage:
User Manual 1176.8674.02 ─ 07
{CLOCK: 54000000}
BB:ARB:WAV:TAG? 'CLOCK'
Queries the content of the CLOCK tag.
Response: 54000000
The clock frequency is set to 54 MHz.
Setting only
{COMMENT: File with data for 3GPP enhanced
channels}
BB:ARB:WAV:TAG? 'COMMENT'
Queries the content of the COMMENT tag of the selected wave-
form file.
Response: 'File with data for 3GPP enhanced
channels'
The comment on the waveform reads "File with data for 3GPP
enhanced channels".
Setting only
{COPYRIGHT: Rohde&Schwarz}
BB:ARB:WAV:TAG? 'COPYRIGHT'
Queries the content of the COPYRIGHT tag of the selected wave-
form file.
Response: 'Rohde&Schwarz'
Copyright resides with Rohde&Schwarz.
Setting only
Waveform and List Format
Tag Description
504