Maintenance; Cleaning - R&S SGT100A User Manual

®
R&S SGT100A

13 Maintenance

The instrument does not need periodic maintenance. Only cleaning the instrument is
essential.
Follow the instructions in the service manual and the safety instructions when
exchanging modules or ordering spare parts. The order number for spare parts is inclu-
ded in the service manual. The service manual includes further information particularly
on troubleshooting, repair, exchange of modules (including battery exchange, adjust-
ment of the OCXO oscillator) and alignment.
The address of our support center and a list of all Rohde & Schwarz service centers
can be found at the beginning of this manual.

13.1 Cleaning

The outside of the instrument can be cleaned sufficiently using a soft, lint-free dust
cloth. Make sure that the fan openings are not obstructed.
Shock hazard
Before cleaning the instrument, make sure that the instrument is switched off and dis-
connected from all power supplies.
Instrument damage caused by cleaning agents
Cleaning agents contain substances that may damage the instrument. For example,
cleaning agents that contain a solvent may damage the front panel labeling, plastic
parts, or the display.
Never use cleaning agents such as solvents (thinners, acetone, etc), acids, bases, or
other substances.
The outside of the instrument can be cleaned sufficiently using a soft, lint-free dust
cloth.
User Manual 1176.8674.02 ─ 07
Maintenance
Cleaning
519