R&S SGT100A User Manual page 291

®
R&S SGT100A
For more information on this topic, see also application note 1GP109.
You find all the remote control command sets supported by the R&S SGT in a selec-
tion list.
The selected instrument also defines the identification string that is retrieved with query
*IDN?. In addition to the preset values, you can enter a user-defined identification
string, for example to provide individual identification for each generator, like
'MY_R&S SGT' (see
As any other parameter, you can additionally change the remote control command set
to be emulated via the
emulation, the R&S SGT specific command set is disabled, that means this command
is no longer effective. To return, you need to know the corresponding remote control
command of the simulated instrument.
Access:
► Select "SGMA-GUI > Instrument Name > Setup > Emulations".
Language
Selects the instrument whose remote command set is emulated by the R&S SGT.
Remote command:
:SYSTem:LANGuage
Identification Mode
Selects the way the instrument identification is performed.
"Automatic"
"User Defined"
Remote command:
:SYSTem:IDENtification
User Manual 1176.8674.02 ─ 07
General Instrument Settings and Instrument Setup
Identification Mode
Language command. However, once you have switched to an
on page 485
The "IDN String" and the "OPT String" are set automatically for the
instrument selected with the parameter Language.
Enables the selection of user definable "IDN String" and "OPT String"
for the instrument selected with the parameter Language.
on page 484
and IDN String).
Emulations
260