Security Setting - R&S SGT100A User Manual

®
R&S SGT100A
Unlocking of protected service functions
1. Select "SGMA-GUI main panel > Instrument Name > Setup > Protection".
The "Protection" dialog provides access to the unlocking of protected service func-
tions (authorized personnel of R&S Service Departments only).
2. To deactivate the protection, the correct password has to be entered. After the
instrument has been switched on, the protection levels 1 to 4 are automatically
activated.
Enter "Protection Level 1 > Password > 123456".
Protection Level 1 is activated.
Protection Level / Password
"Protection Level 1" can be activated to expand the functionality of the internal adjust-
ment. The password is 123456.
The other protection levels 2 to 4 provide access to protected service functions. Only
the authorized personnel of R&S Service Departments can access these functions.

8.7 Security Setting

The R&S SGT employs a security concept based on user and security password. The
security password is required for changing several critical settings, like performing firm-
ware updates. Access to the passwords and mass storage security settings is provided
in the "Security" dialog.
► To access the "Security" dialog, select "SGMA-GUI > Instrument Name > Setup >
Security"
The menu is divided into the password sections and the security settings section. In
the password section, the passwords for securing a controlled access to the instrument
are defined and changed.
A change of passwords for the operating system and security password requires the
entry of the old and new password and the conformation of the new password. All set-
tings are only accepted after the "Change Password" button is pressed.
User Manual 1176.8674.02 ─ 07
General Instrument Settings and Instrument Setup
Security Setting
252