R&S SGT100A User Manual page 494

®
R&S SGT100A
Parameters:
<Mode>
Example:
Manual operation:
[:SOURce<hw>]:PULM:PERiod <Period>
Sets the period of the generated pulse. The period determines the repetition frequency
of the internal signal.
Example:
Manual operation:
[:SOURce<hw>]:PULM:POLarity <Polarity>
Parameters:
<Polarity>
Example:
Manual operation:
[:SOURce<hw>]:PULM:SOURce <Source>
Selects the source for pulse modulation.
User Manual 1176.8674.02 ─ 07
SINGle | DOUBle
SINGle
Enables single pulse generation.
DOUBle
Enables double pulse generation. The two pulses are generated
in one pulse period.
*RST: SINGle
PULM:MODE DOUB
enables double pulse generation.
See "Pulse Mode" on page 231
PULM:PER 220 us
the pulse period is 220 us.
See "Pulse Period" on page 231
NORMal | INVerted
NORMal
The RF signal is suppressed during the pulse pause.
INVerted
The RF signal is suppressed during the pulse.
*RST: NORMal
PULM:POL INV
selects inverted polarity.
See "Polarity" on page 231
Remote Control Commands
SOURce Subsystem
463