R&S SGT100A User Manual page 302

®
R&S SGT100A
Operating
state
Standby
Ready
(normal
operation)
To switch the instrument to standby state
► Use one of the following:
a) On the remote PC, select "SGMA-GUI > Instrument Name > Setup > Standby".
b) Press the POWER ON/STANDBY key on the front panel of the instrument.
c) Send the SCPI command:
The current instruments settings are automatically stored. The instrument switches
to a power-saving mode.
In the R&S SGMA-GUI, the standby state is indicated by the red state symbol in
front of the corresponding instrument's name, on the front panel, by the orange
POWER ON/STANDBY button.
The instrument can still be remote controlled.
To return the instrument from standby to ready state
► Use one of the following:
a) On the remote PC, select "SGMA-GUI > Instrument Name > Setup > Restart".
b) Press the orange POWER ON/STANDBY key on the front panel of the instru-
c) Send the SCPI command:
The instrument loads the last setup with all instrument settings, switches to ready
state and is ready for normal operation.
In the R&S SGMA-GUI, the ready state is indicated by the green state symbol in
front of the instrument's name.
On the front panel, the ready state is indicated by the green POWER ON/STAND
BY button.
To switch all connected instruments to standby state and close the R&S SGMA-
GUI
► In the R&S SGMA-GUI main panel, select "File > Shut down instruments and exit".
The R&S SGMA-GUI quits and switches the connected instruments to standby
state.
User Manual 1176.8674.02 ─ 07
Description
The standby power mode keeps the power
switch circuits and the remote control sys-
tem active.
In this state, it is safe to switch off the AC
power and disconnect the instrument from
the power supply.
The instrument is ready for operation. All
modules are power-supplied.
:STANdby
ment.
:RESTart
Performing Configuration Tasks
How to Switch between the Operating States
Indication
In the R&S SGMA-GUI, the status indicator in
front of the instrument name is red.
The orange POWER ON/STAND BY key is on.
In the R&S SGMA-GUI, the status indicator in
front of the instrument name is green.
The green POWER ON/STAND BY key is on.
271