®
R&S
SGT100A
●
Constant I/Q test signal: Continuous test signal with constant IQ and constant
clock frequency of 10 KHz. The values for each I and Q components are selectable
but constant. They are defined as a decimal number, which is decimal-to-binary
converted internally. The signal is provided as a 16-bit wide digital signal for both I
and Q channels.
Converted to analog, the signal is output directly at the BNC connectors I and Q
outputs of the instrument.
7.1.2.2
General Settings
The "Arbitraty Waveform Modulation" menu provides settings for enabling the ARB and
calling further dialogs for selecting and configuring a waveform.
State
Enables/disables ARB modulation.
User Manual 1176.8674.02 ─ 07
Signal Generator Settings
Baseband
80