General Commands; Wai - R&S SGT100A User Manual

®
R&S SGT100A
Return values:
<ErrorCode>
Usage:

*WAI

Wait to continue
Prevents servicing of the subsequent commands until all preceding commands have
been executed and all signals have settled (see also command synchronization and
*OPC).
Usage:

11.2 General Commands

:RESTart
:STANdby
:LOCK?
:UNLock
:RESTart
Restarts the instrument.
Usage:
:STANdby
Switches the instruments to stand by state. To return the instrument from standby to
ready state, send the SCPI command:RESTart.
Usage:
:LOCK? <LockRequestId>
Sends a lock request ID which uniquely identifies the controller to the instrument.
User Manual 1176.8674.02 ─ 07
integer > 0 (in decimal format)
An error occurred.
(For details see the Service Manual supplied with the instru-
ment).
0
No errors occurred.
Query only
Event
....................................................................................................................... 309
..................................................................................................................... 309
.........................................................................................................................309
........................................................................................................................310
Event
Event
Remote Control Commands
General Commands
309