R&S SGT100A User Manual page 476

®
R&S SGT100A
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:COEFficients:
Queries the available polynomial files in the default directory. Only files with the file
extension *.iq_poly are listed.
Example:
Usage:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:COEFficients:STORe
Saves the polynomial function as polynomial file.
Setting parameters:
<Filename>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:COEFficients:LOAD
Loads the selected polynomial file.
Setting parameters:
<Filename>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:SHAPing:CLIPping:FROM
Enables clipping and defines its limits.
Parameters:
<ClippingFrom>
Example:
User Manual 1176.8674.02 ─ 07
CATalog?
See Example "Generating an RF envelope signal and defining
the shaping function"
Query only
See "Save/Recall Polynomial"
<Filename>
string
See Example "Generating an RF envelope signal and defining
the shaping function"
Setting only
See "Save/Recall Polynomial"
<Filename>
string
See Example "Generating an RF envelope signal and defining
the shaping function"
Setting only
See "Save/Recall Polynomial"
<ClippingFrom>
integer
Range:
*RST:
See Example "Generating an RF envelope signal and defining
the shaping function"
Remote Control Commands
on page 432
on page 178
on page 432
on page 178
on page 432
on page 178
0 to 100
0
on page 432
SOURce Subsystem
445