R&S SGT100A User Manual page 90

®
R&S SGT100A
Click one of the buttons with an instrument name on it to access the menu tree with
further settings for the corresponding instrument. For a detailed description of the pro-
vided settings, see:
●
Chapter 8, "General Instrument Settings and Instrument
general settings
●
Chapter 7, "Signal Generator
Instrument/Connection State
The three colors of the state indicator in front of the instrument's name distinguish
between the following states:
●
Gray: the instrument is configured and activated in the R&S SGMA-GUI but there is
no connection to the instrument.
●
Green: the instrument is active, the connection is working and the instrument can
be manually and remotely operated.
●
Red: the instrument is in one of the following states:
–
–
–
Maximum Frequency
The numbers in the rectangular box
maximum frequency of the instrument.
Pulse Modulation
A
switched on.
Instrument Name
Displays the alias name of the instrument, as selected by the parameter "SGMA-GUI >
Setup > Instruments > Add/Edit Instruments > Symbolic Name".
Click the button to access a menu tree for configuring the available instrument's set-
tings, e.g. "Level" settings.
User Manual 1176.8674.02 ─ 07
Standby state
To operate the instrument manually, it has to be switched to ready state (see
"To return the instrument from standby to ready state"
Instrument locked
The red state indication together with the message "Instrument Locked" in the
"Info" line indicates that the instrument is locked for
another SGMA-GUI or controller.
The instrument is performing a time consuming operation, e.g. a selftest.
sign on the left of the instrument's name indicates that the pulse modulation is
Understanding the R&S SGMA-GUI Software
Settings", on page 75 for R&S SGT setting.
on the left of the instrument's name indicate the
Main Panel
Setup", on page 243 for
on page 271).
Exclusive Access from
59