R&S SGT100A User Manual page 420

®
R&S SGT100A
Example:
[:SOURce<hw>]:BB:ARBitrary:WAVeform:POINts?
The command queries the number of samples in the waveform file selected using com-
mand :ARB:WAV:SEL. Only the file name has to be entered. Only files with the file
extension *.wv will be read out.
Return values:
<Points>
Example:
Usage:
[:SOURce<hw>]:BB:ARBitrary:WAVeform:SELect <Filename>
Selects the waveform file. If the file is not on the default path, the path must be speci-
fied.
The file extension may be omitted. Only files with the file extension *.wv will be cre-
ated or loaded.
Parameters:
<Filename>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:WAVeform:TAG?
The command queries the content of the specified tag of the selected Waveform file.
Return values:
<Tag>
Example:
Usage:
User Manual 1176.8674.02 ─ 07
See
[:SOURce<hw>]:BB:ARBitrary:WAVeform:
HDDStreaming:BLEVel?
<waveform filename>
Range: 0 to 1000
*RST: 1
BB:ARB:WAV:POINt?
queries the number of I/Q values pairs in the waveform file.
Response: 401
the waveform file contains 401 I/Q values pairs.
Query only
string
BB:ARB:WAV:SEL '/var/user/wave1.wv'
selects waveform file and loads it.
See "Load Waveform"
string
BB:ARB:WAV:SEL '/var/user/wave1.wv'
selects waveform file and loads it
BB:ARB:WAV:TAG? 'comment'
queries the content of the comment tag
Response: "Sine wave for test purposes"
Query only
Remote Control Commands
SOURce Subsystem
on page 388
on page 81
389