Versions/Options Dialog - R&S SGT100A User Manual

®
R&S SGT100A
See also
Remote command:
:INSTruments:GPIB:ADDRess
Board Number
Identifies the GPIB bus card of the controller to that the adapter is connected.
See also
Remote command:
:INSTruments:GPIB:BOARd
Serial Number
Enters the serial number as instrument's identification while using the USB or PCIe
interfaces for remote control.
Remote command:
:INSTruments:SERial
OK
Confirms the settings and closes the dialog.
Apply
Confirms the settings.
Cancel
Discards settings and closes the dialog.
6.1.2.3

Versions/Options Dialog

Querying information about the installed options and software version
► Select "Setup > Software".
An info dialog opens, showing program information.
Software
Displays information on:
"Package"
User Manual 1176.8674.02 ─ 07
Chapter 10.1.5, "GPIB Interface (IEC/IEEE Bus
Chapter 10.1.5, "GPIB Interface (IEC/IEEE Bus
on page 73
Installed software packages.
Understanding the R&S SGMA-GUI Software
on page 72
on page 72
Operating Menu and Toolbar
Interface)", on page 284.
Interface)", on page 284.
54