R&S SGT100A User Manual page 457

®
R&S SGT100A
[:SOURce<hw>]:IQ:OUTPut:ANALog:STATe <State>
Activates the specified analog I/Q output.
Parameters:
<State>
Example:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:PRESet
Sets the default settings (*RST values specified for the commands).
Not affected are:
●
The state set with the command [:SOURce<hw>]:IQ:OUTPut:ANALog:STATe.
●
If SCONfiguration:EXTernal:PBEHaviour 1, the I/Q ouptput type set with
the command [:SOURce<hw>]:IQ:OUTPut[:ANALog]:TYPE.
Usage:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:SETTing:CATalog?
Queries the files with I/Q output settings in the default directory. Listed are files with the
file extension *.iqout.
Return values:
<Catalog>
Usage:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:SETTing:STORe <Filename>
Stores the current settings into the selected file; the file extension (*.iqout) is
assigned automatically.
Setting parameters:
<Filename>
Usage:
Manual operation:
User Manual 1176.8674.02 ─ 07
0 | 1 | OFF | ON
*RST: 0
SOURce:IQ:OUTPut:ANALog:STATe ON
Activates the output of the analog I/Q signal on the I/Q OUT 1
connectors.
See "State" on page 142
Event
See "Set to Default" on page 142
"<filename1>,<filename2>,..."
Returns a string of file names separated by commas.
Query only
See "Save/Recall" on page 143
"<filename>"
Filename or complete file path
Setting only
See "Save/Recall" on page 143
Remote Control Commands
SOURce Subsystem
426