Instruments:count; Instruments:eaccess[:State]; Instruments:mapping:file; Instruments:name - R&S SGT100A User Manual

®
R&S SGT100A
Manual operation:

:INSTruments:COUNt?

Queries the number of the currently available instruments.
Return values:
<Count>
Example:
Usage:
Manual operation:
:INSTruments:EACCess[:STATe] <State>
"Locks" the instruments, meaning the instrument is reserved and can be operated
exclusively from the remote PC that sent this SCPI command.
Tip: It is recommended to lock the instrument prior to further configuration.
Parameters:
<State>
Example:
Manual operation:
:INSTruments:MAPPing:FILE <File>
Saves the list of the available instruments in a mapping file. Mapping files are stored
with the predefined file extension .map; the file extension may be omitted.
The file is saved in the default directory. Use the command MMEM:CDIRectory to
change the default directory or specify the complete path.
Parameters:
<File>
Example:
Manual operation:
:INSTruments:NAME <Name>
Selects the alias name of the instruments, i.e. sets the "Symbolic Name".
User Manual 1176.8674.02 ─ 07
Understanding the R&S SGMA-GUI Software
See "Available Instruments"
float
Range: 0 to 12
See Chapter 6.6.1, "Configuring Instruments in the R&S SGMA-
GUI", on page 68.
Query only
See "Available Instruments"
List of BOOL-values
<LockInstr#1>,<LockInstr#2>,...
0,1,OFF,ON
See Chapter 6.6.1, "Configuring Instruments in the R&S SGMA-
GUI", on page 68.
See "Exclusive Access"
string
See Chapter 6.6.1, "Configuring Instruments in the R&S SGMA-
GUI", on page 68.
See "Export" on page 51
Remote Control of the R&S SGMA-GUI
on page 50
on page 50
on page 53
71