R&S SGT100A User Manual page 72

®
R&S SGT100A
The two lines to the "Vector Sig Gen" and "Arb Sig Gen" blocks on the block dia-
gram confirm that a remote connection to the R&S SGT is established.
To generate an LTE example waveform file with the R&S WinIQSIM2
1. In the R&S WinIQSIM2, select "Block diagram > Baseband > Config. > EUTRA/
LTE".
2. Adjust the settings as required, for example:
a) Select "Link Direction > Downlink"
b) Select a predefined test model, "Test Setups/Models > E-TM1_1__10MHz"
3. Enable "EUTRA/LTE > State > On".
User Manual 1176.8674.02 ─ 07
How to Create a Waveform File with R&S WinIQSIM2 and Load it in the ARB
First Steps with the Instrument
41